A sliding glass door carried on a top-hung track or running on bottom rollers: the hanging set, the track and the guides, on glass already cut and drilled to the drawing.
Sliding Glass Door Systems
Rollers, tracks and supporting hardware for sliding glass doors and shower panels.
What an order for this scenario runs on
Commonly specified glass thicknesses
- 8 mm
- 10 mm
- 12 mm
1 product line specified into this scenario
The scenario
What buyers run into
The door has to run without jumping the track or drifting out of line. The hanging set, the track profile and the panel size are chosen together, and a set matched to one track profile will not run in another.
How to specify this scenario
Confirm the glass thickness, the panel size and whether the door is top-hung or bottom-rolling first, then the track profile and whether a soft-close or a stopper is required. The track profile, or a photo of the hanger that came off, tells us more than a description.
Typical configuration
The parts this scenario is usually built from
- Hanging set or rollers
- Matched to the panel size and the track profile.
- Top track or bottom guide
- According to the system the door hangs or runs on.
- Floor guide or stopper
- Keeps the panel in line and stops the travel.
Load and safety
The hanging set carries the door, so the panel size and the track decide the set rather than the glass thickness alone. The parts are machined for one glass thickness and one track profile and cannot be adapted afterwards.
Installation notes
Work from the drawing supplied with the model you ordered rather than from the hanger that came off, and check the parts against the glass before drilling.
Product lines specified into this scenario
Sliding Door Rollers
Rollers and hanging sets for sliding glass doors, in the configurations your system uses.
Where to go next
Direct inquiries
Need immediate technical specifications or a quotation?
Send your drawings, models, quantities and destination port. Our Foshan export engineering team replies within 24 working hours.